| a) | Survey existing services and ground levels for 27 Km pipeline and access road.
|
|
| b) | Design pipeline profile drawings, valve chambers, thrust blocks, road crossings, line anchors, access roads, protection slabs, wash outs, air vents, tie-on details with CS trunk line and the fibre optic system for remote control system and connections with the main SCADA network.
|
|
| c) | Procure pipes, fittings, valves, fibre optic lines and accessories.
|
|
| d) | Excavate, lay, construct chambers, and install valves & fittings and hydro-test to 27 bars the 27 Km of Twin GRP 1400 mm pipeline network. |
|
| e) | Construct and maintain temporary access roads.
|
|
| f) | Construct embankment and bund formation and other similar related earthworks throughout the entire length of the pipeline. |
|
| g) | Construct embankment and bund formation and other similar related earthworks throughout the entire length of the pipeline. |
|
| h) | Connections and disconnections to existing water pipelines.
|
|
| i) | Reinforced concrete valve and meter chambers complete with all accessories, access ladders, manhole covers and frames, ventilation pipes, etc.
|
|
| j) | Reinforced concrete inspection chambers for fiber optic cables complete with all accessories, manhole covers etc.
|
|
| k) | Reinforced concrete service culverts under existing roads.
|
|
| l) | Reinforced concrete drainage culverts under pipe bunds.
|
|
| m) | Reinforced concrete anchor/thrust blocks and line anchors.
|
|
| n) | Reinforced concrete pipeline protection slabs.
|
|
| o) | Thrust boring for road crossings.
|
|
| p) | Thrust boring for gas and oil pipeline crossings
|
|
| q) | Installation of Fiber Optic cables and associated ducts.
|
|
| r) | Installation of electrical and control systems including electromagnetic flow meters, pressure transmitters, actuators and associated distribution boards and control cabinets etc.
|
|
| Commissioning and test run of the systems as may be required. |
|
| Back to Past Projects |
